Announcement from Trek: December 12, 2013
A small number of the bicycle models below were made with an attachment bolt, on the front brake quick-release, that could come loose. This could allow the cable clamp to detach and potentially result in the loss of use of the front brake of the bicycle. If this happens, you could have difficulty stopping your bicycle.
• 2013 Madone 5.2 (standard and WSD)
• 2013 Madone 5.9 (standard)
• 2013 Madone 6.2 (standard and WSD)
• 2013 Madone 6.5 (standard)
• 2013 Madone 7.7 (standard)
• 2013 Madone 7.9 (standard and WSD)
Consumer safety is very important to us. Therefore, Trek will replace the front brake on an affected bicycle, free of charge.
This notice contains important information regarding what to do next if you think you may have purchased one of these bicycles.
Only specific bicycles from model year 2013 are affected. The following page shows you how to identify the affected
models. A list of affected bicycle serial numbers can be found at the following website:
DO NOT RIDE YOUR BICYCLE UNTIL THE FRONT BRAKE HAS BEEN INSPECTED
If the front brake loses functionality unexpectedly, you could have difficulty stopping your bicycle. Do not ride this bicycle
until your retailer has inspected the brake to determine if the attachment bolt is affected by this recall.
WHAT TREK WILL DO FOR OWNERS OF A RECALLED BICYCLE
If you own a bicycle that is affected by this recall, Trek will provide you—through your Trek retailer—a free replacement
of the front brake on your bicycle. If you have any questions, please contact your retailer, or call Trek at the special recall
Please contact us on 01209 215787 if you think you may be affected.